The sliding contact line is a sliding transmission device suitable for abnormally high temperature and harsh environment, which is divided into low voltage type and high voltage type. Widely used in coking, steelmaking and other high temperature occasions. The sliding contact line runs reliably and does not cause power failure. Suitable for high temperature, high dust, high corrosive gas harsh environment. High mechanical strength, not easy to bend deformation, withstand strong short-circuit impulse current.
The sliding contact wire adopts copper conductor, which can greatly reduce the power loss. Reactance can be reduced by adding an auxiliary cable. High mechanical strength, not easy to bend deformation, can withstand strong short-circuit impulse current. Reasonable structure, large heat dissipation area, easy installation, special specifications of sliding wire can be customized.
After adopting the dovetail groove insert technology, the screw loosening caused by vibration in the operation of other rigid sliding wire is solved, so that the whole sliding wire is firm and reliable. The use of copper conductor can greatly reduce the power loss of wire. After the auxiliary cable is added, the low impedance sliding contact line can be formed, and the line impedance is doubled. Wiring can be slid on the top or side. It has the advantages of large cooling surface, compact and simple structure, convenient installation and maintenance.
Your message must be between 20-3,000 characters!
